Water Softeners

Ion-exchange and water softening is used to soften hard water, which is typically due to high amounts of magnesium and calcium salts. An ion-exchange and water softening system functions automatically and consists of pressure/filtration vessel(s) filled with media, automatic valves and piping and a brine tank. In additon, the models for continuous flow (2-AG) come with stainless steel frame to help installation and maintenance. Water softeners are regenerated with brine – salt tablets are added to brine tank periodically. Equipment are delivered with start-up package of salt tablets. All StrongFlow’s standard softeners are delivered as fully assembled units. Electric supply and drainage is needed in the installation location. We’re happy to help if you need any assistance with the commissioning or installations.

AG Water Softeners / Filters

  • AG series filters are automatic water softeners with electronic chronometric or volumetric controller
  • Filters are used for water softening and iron and manganese removal
  • Composite pressure vessels with polyethylene liner reinforced with fiberglass
  • Filters are controlled by a programmed automatic valve
Technical Data
AG-CAB AG-250 AG-330 AG-370 AG-410 AG-470
Flow rate (l/min) 32,7 32,7 57 71,7 88 115,6
Flow rate (m³/h) 2 2 3,4 4,3 5,3 6
Capacity (m³/°dH) 80 120 240 336 400 528
Resin volume (l) 25 38 75 105 125 165
Equipment dimensions L x D x H (cm) 32 x 50 x 114 90 x 50 x 165 100 x 60 x 165 110 x 70 x 185 120 x 80 x 185 120 x 90 x 195
Brine tank size D x H (cm) 38 x 79 38 x 79 38 x 79 57 x 112 57 x 112
Brine tank volume (l) 80 85 85 85 190 190
Operating Pressure 3-8 bar
Operating temperature 4-30 °C
Supply Voltage
220v / 50Hz

2-AG Volumetric Water Softeners / Filters

  • 2-AG series filters are automatic duplex water softeners with electronic volumetric controller
  • Filters are used for water softening and iron and manganese removal
  • Composite pressure vessels with Polyethylene liner reinforced with fiberglass. Piping material PVC
  • Filters are controlled by a programmed automatic valve
Technical Data
2-AG-250 2-AG-330 2-AG-370 2-AG-410 2-AG-470 2-AG-550
Flow rate (l/min) 2 x 32,7 2 x 57 2 x 71,7 2 x 88 2 x 100 2 x 100
Flow rate (m³/h) 2 x 1,96 2 x 3,42 2 x 4,3 2 x 5,28 2 x 5,7 2 x 5,7
Capacity (m³/°dH) 2 x 120 2 x 240 2 x 336 2 x 400 2 x 528 2 x 640
Resin volume (l) 75 150 210 250 330 400
Equipment dimensions L x D x H (cm) 140 x 50 x 170 150 x 55 x 170 160 x 60 x 195 170 x 65 x 195 215 x 80 x 205 230 x 90 x 195
Brine tank size D x H (cm) 57 x 113 57 x 113 57 x 113 72 x 120 83 x 120 83 x 120
Brine tank volume (l) 190 190 190 340 460 460
Operating Pressure 3-8 bar
Operating Temperature 4-30 °C
Supply Voltage 220v / 50Hz